Local and funding

Business automation for Hull and East Yorkshire manufacturers and wholesalers: what is worth doing first

By · Published

For most Hull and East Yorkshire manufacturers and wholesalers, the first business automation worth doing is the one that stops the order desk typing orders in twice: emailed and PDF orders go into Sage or your order system, with a person approving each one. Drafting quotations and reading supplier invoices usually come next. Made Smarter Yorkshire & Humber and the HEY Growth Hub may part-fund the work.

Linda walks round her office at half past seven on a Tuesday, coffee in hand, before the phones start. Her firm makes and wholesales food from a unit in east Hull and employs 40 people. Sandra is on the order desk with a PDF on one screen and Sage on the other, typing one into the other. Dave has a quote half built that should have gone yesterday. Julie has a stack of supplier invoices and a ruler. Mark is copying figures into the Friday report, and it is only Tuesday. Everyone is busy and nobody is doing anything wrong. Linda still cannot say where the margin goes.

Linda and her office are made up. The walk is one any owner in Hull or East Yorkshire can do tomorrow.

Key facts

  • Made Smarter Yorkshire & Humber has supported more than 1,250 manufacturers and awarded 112 technology grants worth £1.6 million since 2021 (Made Smarter, June 2026).
  • Its digital technology grants have been up to £20,000 at up to 50% match, paid retrospectively, for manufacturers with up to 249 staff and turnover under £36 million (Made Smarter).
  • The HEY Growth Hub Business Growth Grant covers 40% of project costs, £2,500 to £12,500, for specialist advice (HEY Growth Hub).
  • Hull sales order processor roles have been advertised at £12.21 to £15 an hour (Michael Page, Adecco).
  • The most common request in Sage 50 user forums is to “automate the process of manually entering sales orders from PDF purchase orders received via email” (Sage Community Hub).

Which local businesses is this for?

Established firms of roughly 10 to 100 people whose office types out information that already exists in writing somewhere else. Linda’s is one. Around Hull, the Humber and the East Riding there are four kinds.

Food manufacturers and delivered wholesalers supplying shops, caterers, pubs and hotels. Orders arrive by email, PDF, spreadsheet and phone before a daily cut-off, and the vans leave whether Sandra has finished typing or not. See food manufacturing and wholesale distribution.

Building-products makers in timber, doors, windows, roofing, insulation and aggregates, where quotes are built by hand from a price list and the accepted quote is typed again as an order. See building products.

Trade and builders’ merchants with a trade counter, account customers, pro-formas for cash customers and price breaks that live in someone’s head. See trade merchants.

The caravan and holiday-home supply chain. These firms make or distribute components, furnishings, fittings and fixings for the region’s park-home and caravan builders. Schedules arrive as spreadsheets and PDFs, and the office absorbs the seasonal peak by working late.

What they share is a working accounts or order system that the owner has no wish to replace. Usually it is Sage 50, Sage 200, Pegasus Opera or something older that was written for the firm. Good. Replacing it is rarely the answer. The Ipsos evaluation of the Made Smarter programme found businesses expected friction from “the complexity of integrating IDTs with existing systems and processes” (Ipsos for DBT, June 2025). IDTs are industrial digital technologies, the report’s term for new software and machines. That friction is real, and it is the reason to automate around the system you have.

What are the first three automations that usually pay?

The jobs where there is a lot of typing, the paperwork already arrives as a file and a person can still approve the result. On Linda’s walk they are the first three desks she passes, in this order.

  1. Sandra’s desk. Emailed and PDF customer orders into your order system. Software reads the order, matches the customer and products, applies your rules and lays out a prepared sales order for Sandra to approve. Nothing enters Sage until she clicks. Sage 50 has no web API, which is a way for one program to talk to another, but it can be reached through import files, Sage’s own developer toolkit (Sage Data Objects) or a connector. The Sage 50 systems page explains the routes, and what is sales order processing automation describes each step.
  2. Dave’s desk. Draft quotations from emailed enquiries. An enquiry comes in, the software picks out the items and quantities, looks them up in your price file and drafts a quote in your own layout for Dave to check and send. The quote goes today, not tomorrow. One UK Business Forums member had got quoting “down from what used to take almost a full day to around about an hour” and still hated it (thread). See automating quotes from email enquiries.
  3. Julie’s desk. Supplier invoices read and checked. Invoices arrive by email, get read, compared with the purchase order and the delivery where those exist, and sent to the right person to approve before anything is posted. Sage 50 has no native three-way matching, which is the accountant’s name for checking invoice, order and delivery against each other, so this is a gap worth filling. See automating supplier invoice processing.

Mark’s Friday report is close behind, and reporting and data automation covers it. It only reads figures, so there is little to go wrong. Keeping stock in step with a web shop, pro-formas, matching delivery notes and allocating customer payments are real and worth doing, but usually second.

Automation is coming to food, building products and the merchant trade. The firm that does it first gets its quote out the same day and answers its customers faster.

What would it cost, and what would it be worth?

Better Systems Co.’s price bands are published and fixed before work starts. An audit is £500 to £1,250 and is credited against the build. A quick win is £1,500 to £3,000. A business workflow is £3,000 to £7,500. Operations automation is £7,500 to £15,000 and above. Managed support is £150 to £1,500 a month. The pricing page has the detail.

Here is Sandra’s desk as a worked example, with every figure an assumption.

  • Assumed firm: Linda’s, a food manufacturer and delivered wholesaler near Hull, receiving 200 emailed orders a week, each taking Sandra 5 minutes to type and check.
  • Better Systems Co.’s formula: 200 times 5, divided by 60, times 48 working weeks, is 800 hours a year.
  • Assumed fully loaded hourly cost: £15, rounded up from the £12.21 to £15 an hour advertised for Hull order processor roles to allow for employer costs.
  • Value of the hours: 800 hours times £15 is £12,000 a year.
  • Assumed build: emailed orders into one system, so the quick win band, say £2,500.

That is nearly 17 hours of typing in Sandra’s week. The £12,000 is capacity released, our label for hours the office gets back. It is not cash saved. It becomes money only when the hours go into quoting, growth without a hire, or less of the overtime Linda signs off. How to calculate the ROI of business automation sets out the reasoning, and the ROI calculator runs it on your numbers.

Which local funding routes exist?

Two, and both are worth a phone call before Linda signs anything.

Made Smarter Yorkshire & Humber is the manufacturing programme. It has offered digital technology grants of up to £20,000, at up to 50% match funding, for manufacturers with 249 employees or fewer and turnover under £36 million. Match funding means the grant pays part and the firm pays the rest. It is paid retrospectively, so Linda pays the supplier first and claims afterwards. The grant follows a digital readiness assessment and a digital roadmap, which is a written plan, agreed with an adviser, of the technology the firm should bring in and in what order. Period Mouldings received £20,000 towards an ERP implementation, meaning new office software for orders, stock and accounts (case study). The previous funding window closed at the end of March 2026 (The Manufacturer); check the Made Smarter page for current status. Whether software subscriptions and build fees are eligible costs is not published, so ask the adviser. Our post on whether a Made Smarter grant can pay for order-processing automation walks through the sequence.

The HEY Growth Hub Business Growth Grant covers 40% of project costs, £2,500 to £12,500, for specialist advice. It is the route a wholesaler or merchant with no manufacturing should look at, since Made Smarter is for manufacturers. Whether an automation audit counts as specialist advice is the Growth Hub’s call.

Both exist because cost is the barrier firms name most. Ipsos found “funding constraints were considered the principal factor constraining investment” among Made Smarter participants, and in an Oxford Innovation Advice survey of 229 small and medium-sized manufacturers, 65% of Yorkshire and Humber respondents said more government funding was needed (Insider Media).

What should you ask any provider?

Six questions. Linda has been sold software before, and this time she wants the answers in writing.

  1. Will you come and watch our order desk for a morning before you quote? If not, how will you know about the odd cases Sandra handles from memory?
  2. Will we keep our existing system, and how exactly will you connect to it? For Sage 50, ask which of the four routes and why.
  3. Does a person approve every order before it enters our system? If not, what happens to the order the software reads wrongly?
  4. What is the fixed price, what is excluded, and what are the monthly running costs including any other supplier’s licences?
  5. Who owns the result, and what happens if we stop paying you?
  6. What breaks when a customer changes their order layout or Sage releases an update, and who fixes it?

A provider who answers all six in writing is worth talking to, whether they are in Hull or Hampshire.

Why does being local matter?

Because the hard part is understanding the work, and the work is in your office. Sandra’s real process is never the written one. There is the customer who sends two emails for one order, the driver who takes orders at the door, the price list on the wall with pencil corrections. You learn that by sitting beside her at 8am, not on a video call.

Being local also means coming back. Order layouts change. A customer moves to a new purchasing system. Sage updates. A provider twenty minutes away can be in the room the same week. That is the practical case for Better Systems Co. being based in East Yorkshire, visiting firms in Hull and across the East Riding and the Humber, and taking on work across the wider UK where remote working suits the job. It is not a case for choosing a provider by postcode. It is a case for asking who will be in your building.

What does Linda’s walk round look like afterwards?

Take the same Tuesday once the first three jobs are in. Sandra is reading down a list of prepared orders and approving them, and she has stopped one because the quantity looks wrong. Dave’s quote went out yesterday, the day the enquiry arrived. Julie is looking only at the invoices that did not match their purchase orders, and the ruler is in the drawer. Mark’s figures were in his spreadsheet when he sat down, so he is out on the factory floor. Nobody has been replaced, and nobody is typing the same thing twice.

None of it arrives at once. We build one desk at a time, and the first has to prove itself before the second starts.

What we would do

We would start with a free call to find out whether automation is worth looking at, then the automation audit, on site where practical. We watch a morning’s orders, time them, count the odd ones and test how your system can be reached. The report ranks the jobs worth automating and gives a fixed quote for the first one, with the audit fee credited against it. For most firms the first build is sales order processing automation, followed by enquiry-to-quotation and invoice and document automation when the first has proved itself. Where Made Smarter or the Growth Hub might apply, the audit report is the document the application needs.

Sources

Questions people ask

What should a Hull manufacturer or wholesaler automate first?

Whatever your office types most often that already exists in writing somewhere else. For most firms that is customer orders arriving by email or PDF and being typed again into Sage or the order system. There are a lot of them, each order already arrives as a file, and a person can approve every one, which keeps the risk low.

Do we have to replace Sage 50 to automate?

No. Sage 50 has no web API, which is a way for one program to talk to another, but it can be reached through import files, Sage's own developer toolkit (Sage Data Objects) or a third-party connector, and its data can be read through a standard database link (ODBC). Most order-processing automation we scope leaves the accounts package exactly where it is.

Is there funding for automation in Hull and East Yorkshire?

Two routes to check. Made Smarter Yorkshire & Humber has offered digital technology grants of up to £20,000 at up to 50% match for manufacturers with up to 249 staff and turnover under £36 million, paid retrospectively. The HEY Growth Hub Business Growth Grant covers 40% of costs, £2,500 to £12,500, for specialist advice. Both change between rounds, so check the current pages.

Why use a local automation provider rather than a national software vendor?

Because the hard part is not the software, it is understanding how your order desk works, and that is learned by sitting next to it. A provider who can visit, watch a morning's orders and come back when something changes will design around how you actually work. National vendors are right for some firms; the question to ask is who will be in your office.

How much does business automation cost for a firm of 10 to 100 staff?

Better Systems Co.'s bands are an audit at £500 to £1,250 (credited against the build), a quick win at £1,500 to £3,000, a business workflow at £3,000 to £7,500, operations automation at £7,500 to £15,000 and above, and managed support from £150 to £1,500 a month. Getting emailed orders into one system is usually a quick win.

Related guides

Find out what the typing is costing you

A 20-minute call. You tell us about your Sandra, your Dave or your Phil, and how the job gets done today. We tell you honestly whether automating it would pay, and what it would cost.